Latest Job Vacanies in Kuala Lumpur.
1) Instrument Manager
- Malaysian / Local
- Posses a degree in electronic,instrumentation or Chemical Engineering background
- Minimum 10 years experience with at least 5 years experience in similar capacity in Oil & Gas.
- Able to interpret technical drawings,manuals,policies and procedures.
- Experience in instrument installation or commissioning
2) Construction Management Manager
- Malaysian / Local
- Candidates must ensure good progress quality of work at site that meets client’s requirements.
· At least 10 years of working experience in construction field preferably in Oil & Gas and Petrochemical industry or equivalent
· Able to prepare detail Construction Schedule and monitoring.
· Able to being mobilized to Construction Site (Short/Long Term)
· To coordinate construction schedules, manning schedules and review each sub-contractor’s work programme (manpower and equipment deployment, rate of work progress, etc.)
· Ability to work in teams or as independent, possess excellent communication and interpersonal skills.
· Highly motivated to learn and will put in the long hours when required
3) Electrical Engineer
- Malaysian / Local
- Posses a degree in electrical Engineering
- At least 5 years of working experience preferably in Oil & Gas Indsutr
· Capable to prepare electrical deliverables such as Single Line Diagram, Load Schedule, Motor Control Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing, Area Classification drawing, grounding drawing, etc
· Sufficient knowledge of International Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical design up to construction at site (supervision).
· Experience in Project Engineering, Preparation of Electrical Inquiry Documents and commercial/technical Bid Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS, Communication equipments, etc.
· Able to perform Electrical calculation such as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
4) Civil & Structure Engineer
· Possess a Degree in Civil Engineering from a recognized university.
· At least 4 years of working experience in Civil & Structural Design in Oil & Gas, Petrochemical industries.
· Experience in Oil & Gas project would be an advantage.
· Knowledgeable to operate STAAD pro, AutoCAD and ESTEEM.
· Able to do BQ estimation for cost estimation and as-built purpose.
· Able to do inter-discipline co-ordination and possess good communication skills with clients and sub-contractor.
Must be able to work in group .
5) Layout & Piping Engineer
· Candidate must possess at least Degree in Mechanical, Chemical or Material Engineering or equivalent.
· At least 5 – 10 years of piping engineering design experience in Oil & Gas,Petrochemical industries.
· Basic knowledge of piping stress analysis and piping materials.
· Familiar with the international code and standards used in piping materials and good knowledge of ASME31.3, ASME, API, PTS, SHELL DEP, etc.
· Good knowledge and ability in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
6)Piping Designer
·Posses Diploma in Mechanical or Material Engineering or Certificate in Mechanical Drafting.
· Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
· Good knowledge in drawing preparation of Plot Plan, Key Plan, Underground and Aboveground Piping Plan, Detailed Pipe Support and Construction Isometric.
· Good knowledge and ability to prepare civil information and mechanical information such as Pipe Rack, Platform Structure, Nozzle Orientation, Vessel Clip, etc.
· Having previous experience handling revamp project
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Able to work in team and posses excellent interpersonal, communication and writing skills.
· Good skill in the application of Auto-Cad.
· Knowledge in most commonly used software (Microstation) and 3D design exposure would be an advantage.
Send your resume/cv to shamsulsaiman1972@gmail.com
Best Regards:
..................................
Shamsul Bin Saiman
Technical Advisor/Recruitment Consultant
1) Instrument Manager
- Malaysian / Local
- Posses a degree in electronic,instrumentation or Chemical Engineering background
- Minimum 10 years experience with at least 5 years experience in similar capacity in Oil & Gas.
- Able to interpret technical drawings,manuals,policies and procedures.
- Experience in instrument installation or commissioning
2) Construction Management Manager
- Malaysian / Local
- Candidates must ensure good progress quality of work at site that meets client’s requirements.
· At least 10 years of working experience in construction field preferably in Oil & Gas and Petrochemical industry or equivalent
· Able to prepare detail Construction Schedule and monitoring.
· Able to being mobilized to Construction Site (Short/Long Term)
· To coordinate construction schedules, manning schedules and review each sub-contractor’s work programme (manpower and equipment deployment, rate of work progress, etc.)
· Ability to work in teams or as independent, possess excellent communication and interpersonal skills.
· Highly motivated to learn and will put in the long hours when required
3) Electrical Engineer
- Malaysian / Local
- Posses a degree in electrical Engineering
- At least 5 years of working experience preferably in Oil & Gas Indsutr
· Capable to prepare electrical deliverables such as Single Line Diagram, Load Schedule, Motor Control Schedule, Cable Schedule, Cable routing drawing, Power and Control drawing, Area Classification drawing, grounding drawing, etc
· Sufficient knowledge of International Codes & Standards in relation to Electrical Design.
· Able to undertake works in electrical design up to construction at site (supervision).
· Experience in Project Engineering, Preparation of Electrical Inquiry Documents and commercial/technical Bid Evaluation. MTO and Cost Estimation and Inter-Discipline coordination.
· Familiar with Electrical Equipments such as Transformers, HV & LV Switchgear, MCC, Motors, UPS, LCS, Communication equipments, etc.
· Able to perform Electrical calculation such as Cable sizing/Voltage Drop calculation, Short circuit study, etc.
4) Civil & Structure Engineer
· Possess a Degree in Civil Engineering from a recognized university.
· At least 4 years of working experience in Civil & Structural Design in Oil & Gas, Petrochemical industries.
· Experience in Oil & Gas project would be an advantage.
· Knowledgeable to operate STAAD pro, AutoCAD and ESTEEM.
· Able to do BQ estimation for cost estimation and as-built purpose.
· Able to do inter-discipline co-ordination and possess good communication skills with clients and sub-contractor.
Must be able to work in group .
5) Layout & Piping Engineer
· Candidate must possess at least Degree in Mechanical, Chemical or Material Engineering or equivalent.
· At least 5 – 10 years of piping engineering design experience in Oil & Gas,Petrochemical industries.
· Basic knowledge of piping stress analysis and piping materials.
· Familiar with the international code and standards used in piping materials and good knowledge of ASME31.3, ASME, API, PTS, SHELL DEP, etc.
· Good knowledge and ability in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
6)Piping Designer
·Posses Diploma in Mechanical or Material Engineering or Certificate in Mechanical Drafting.
· Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
· Good knowledge in drawing preparation of Plot Plan, Key Plan, Underground and Aboveground Piping Plan, Detailed Pipe Support and Construction Isometric.
· Good knowledge and ability to prepare civil information and mechanical information such as Pipe Rack, Platform Structure, Nozzle Orientation, Vessel Clip, etc.
· Having previous experience handling revamp project
· Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
· Able to work in team and posses excellent interpersonal, communication and writing skills.
· Good skill in the application of Auto-Cad.
· Knowledge in most commonly used software (Microstation) and 3D design exposure would be an advantage.
Send your resume/cv to shamsulsaiman1972@gmail.com
Best Regards:
..................................
Shamsul Bin Saiman
Technical Advisor/Recruitment Consultant
Published Date: 04/08/2012
